L:
L60:
L60R:	INDEXING SCHEME RELATING TO VEHICLES, VEHICLE FITTINGS, OR VEHICLE PARTS, NOT OTHERWISE PROVIDED FOR
L60R1/00:	Optical viewing arrangements
L60R1/00F:	. integrated in the windows, e.g. Fresnel lenses
L60R1/00G:	. specially adapted for covering the peripheral part of the vehicle, e.g. for viewing tyres, bumpers or the like integrated in the windows B60R1/00F; combined with rear-view mirrors B60R1/08
L60R1/00G2:	. . for viewing trailer hitches
L60R1/00H:	. specially adapted for viewing traffic-lights
L60R1/00K:	. Side-view mirrors, e.g. V-shaped mirrors located at the front or rear part of the vehicle combined with rear-view mirrors B60R1/08; side-view periscopes B60R1/10
L60R1/00K2:	. . specially adapted for covering the lateral blind spot not covered by the usual rear-view mirror
L60R1/00L:	. allowing the driver to see passengers, e.g. for busses combined with rear-view mirrors B60R1/08
L60R1/02:	. Rear-view mirror arrangements
L60R1/02F:	. . comprising special mechanical means for correcting the field of view in relation to particular driving conditions, e.g. change of lane; scanning mirrors
L60R1/04:	. . mounted inside vehicle B60R1/02F, B60R1/08 take precedence
L60R1/06:	. . mounted on vehicle exterior B60R1/02F, B60R1/08 take precedence
L60R1/062:	. . . with remote control for adjusting position B60R1/06F2 takes precedence
L60R1/062B:	. . . . by hydraulically or pneumatically powered actuators
L60R1/064:	. . . . by manually powered actuators
L60R1/066:	. . . . . for adjusting the mirror relative to its housing
L60R1/068:	. . . . . . using cables
L60R1/06C:	. . . comprising means for cleaning or deicing
L60R1/06F:	. . . specially adapted for mounting on trucks, e.g. by C-shaped support means
L60R1/06F2:	. . . . with remote position control adjustment
L60R1/06F2B:	. . . . . by manually actuated mechanical means, e.g. push-pull cables
L60R1/06F2C:	. . . . . by electrically actuated means
L60R1/06F2D:	. . . . . by hydraulically or pneumatically actuated means
L60R1/06F4:	. . . . foldable along the vehicle, e.g. in case of external force applied thereon
L60R1/07:	. . . . by electrically powered actuators
L60R1/072:	. . . . . for adjusting the mirror relative to its housing
L60R1/074:	. . . . . for retracting the mirror arrangements to a non-use position alongside the vehicle
L60R1/076:	. . . yieldable to excessive external force and provided with an indexed use position
L60R1/078:	. . . easily removable; mounted for bodily outward movement, e.g. when towing
L60R1/08:	. . involving special optical features, e.g. avoiding blind spots ,e.g. convex mirrors; Side-by-side associations of rear-view and other mirrors B60R1/02F, B60R1/10 take precedence
L60R1/08D:	. . . avoiding blind spots, e.g. by using a side-by-side association of mirrors
L60R1/08D2:	. . . . using a single wide field mirror or an association of rigidly connected mirrors
L60R1/08G:	. . . Anti-glare mirrors, e.g. "day-night" mirrors
L60R1/08G2:	. . . . using a removable filtering or hiding screen associated with windows or windscreens B60J3/00
L60R1/08G3:	. . . . using a combination of interchangeable reflecting surfaces, e.g. reversible mirrors
L60R1/08G4:	. . . . using a mirror angularly movable between a position of use and a non-glare position reflecting a dark field to the user, e.g. situated behind a transparent glass used as low-reflecting surface; Wedge-shaped mirrors
L60R1/08G4B:	. . . . . with remote or automatic control means
L60R1/08G5:	. . . . using a cell of electrically changeable optical characteristic, e.g. liquid-crystal or electrochromic mirrors
L60R1/08G6:	. . . . using a liquid filtering layer of variable thickness
L60R1/10:	. Front-view mirror arrangements; specially adapted for covering the peripheral part of the vehicle B60R1/00G ; periscope arrangements ,i.e. optical devices using combinations of mirrors, lenses, prisms or the like specially adapted for covering the peripheral part of the vehicle B60R1/00G; for viewing traffic-lights B60R1/00H; Other mirror arrangements giving a view from above or under the vehicle
L60R1/10B:	. . Optical arrangements giving a view under the vehicle, e.g. using periscopes
L60R1/12:	. Mirror assemblies combined with other articles, e.g. clocks
L60R1/12A:	. . with lamps; with turn indicators
L60R1/12B:	. . with information displays
L60R1/12C:	. . with sensors or transducers
L60R1/12D:	. . with thermometers
L60R1/12E:	. . with vanity mirrors
L60R1/12F:	. . with clocks
L60R1/12G:	. . with cameras, video cameras or video screens
L60R1/12H:	. . with antennae
L60R1/12J:	. . with sun visors
L60R1/12K:	. . with radio receivers, loud-speakers or buzzers
L60R1/12L:	. . with communication systems other than radio-receivers, e.g. keyless entry systems, navigation systems; with anti-collision systems
L60R1/12M:	. . with holding means for personal articles
L60R3/00:	Arrangements of steps or ladders facilitating access to or on the vehicle , e.g. running-boards
L60R3/00A:	. Running boards for vehicle tops 3/00B; at the sides of the vehicle for carrying loads B60R9/02
L60R3/00B:	. Catwalks, running boards for vehicle tops, access means for vehicle tops; Handrails therefor
L60R3/00C:	. Removable steps or ladders, e.g. foldable as access means for vehicle tops B60R3/00B
L60R3/02:	. Retractable steps or ladders, e.g. movable under shock B60R3/00B takes precedence
L60R3/04:	. with provisions for shoe scraping
L60R5/00:	Compartments within vehicle body primarily intended or sufficiently spacious for trunks, suit-cases, or the like
L60R5/00B:	. Luggage racks, e.g. for busses primarily intended for passengers` property smaller than suitcases B60R7/04; B60R7/08; luggage racks for rail vehicles B61D37/00B
L60R5/00D:	. stowing or holding means for elongated articles, e.g. skis inside vehicles
L60R5/02:	. arranged at front of vehicle B60R5/00B takes precedence
L60R5/04:	. arranged at rear of vehicle B60R5/00B, B60R5/00D take precedence; external trunks arranged at rear of vehicle B60R9/06A
L60R5/04A:	. . extensible externally of the vehicle body, e.g. to create an open luggage compartment of increased capacity devices for anchoring the boot lid while carrying oversize objects E05C17/04B
L60R5/04A2:	. . . to create an enclosed luggage compartment of increased capacity, e.g. with ventilation apertures for transporting dogs
L60R5/04B:	. . luggage covering means, e.g. parcel shelves
L60R5/04B2:	. . . collapsible or transformable
L60R5/04B2B:	. . . . collapsible by rolling-up
L60R5/04B2C:	. . . . of accordion-type, i.e. collapsible by sliding and folding
L60R7/00:	Stowing or holding appliances inside vehicle primarily intended for personal property smaller than suit-cases, e.g. travelling articles, or maps
L60R7/00B:	. Nets or elastic pockets tensioned against walls or backrests
L60R7/02:	. in separate luggage compartment B60R7/00B takes precedence
L60R7/04:	. in driver or passenger space, e.g. using racks B60R7/00B, B60R7/08 take precedence
L60R7/04B:	. . mounted on or under a seat
L60R7/04D:	. . mounted on door
L60R7/05:	. . mounted on sun visor
L60R7/06:	. . mounted on or below dashboards
L60R7/08:	. Disposition of racks, clips, holders, containers or the like for supporting specific articles B60R7/00B takes precedence
L60R7/08B:	. . for supporting maps
L60R7/08C:	. . for supporting spectacles
L60R7/08D:	. . for supporting tissues or tissue boxes
L60R7/08F:	. . for supporting flowers or flower vases
L60R7/08G:	. . for stowing money or valuables, e.g. using safes
L60R7/08H:	. . for stowing tape cartridges, compact discs, or the like
L60R7/10:	. . for supporting hats, clothes or clothes hangers
L60R7/12:	. . for supporting umbrellas
L60R7/14:	. . for supporting weapons
L60R9/00:	Supplementary fittings on vehicle exterior for carrying loads, e.g. luggage, sports gear or the like
L60R9/02:	. at the sides, e.g. on running-board [M1204]
L60R9/04:	. Carriers associated with vehicle roof
L60R9/042:	. . Carriers characterised by means to facilitate loading or unloading of the load, e.g. rollers, tracks, or the like [M1204]
L60R9/042B:	. . . for ladders
L60R9/042D:	. . . for small vehicles, e.g. invalid chairs, perambulators
L60R9/045:	. . Carriers being adjustable or transformable, e.g. expansible, collapsible transformable into tents B60P3/36; into beds B60P3/38
L60R9/048:	. . Carriers characterised by article-gripping, -covering, -retaining, or -locking means
L60R9/048B:	. . . for ladders B60R9/042B takes precedence
L60R9/05:	. . Carriers characterised by wind deflecting means
L60R9/052:	. . Carriers comprising elongate members extending only transversely of vehicle [M1204]
L60R9/055:	. . Enclosure-type carriers, e.g. containers, boxes
L60R9/058:	. . characterised by releasable attaching means between carrier and roof
L60R9/06:	. at vehicle front or rear rear luggage compartments within vehicle extensible externally of the vehicle body B60R5/04A
L60R9/06A:	. . Enclosure-type carriers, e.g. trunks
L60R9/08:	. specially adapted for sports gear
L60R9/10:	. . for cycles
L60R9/12:	. . for skis
L60R11/00:	Arrangements for holding or mounting articles, not otherwise provided for
L60R11/00P:	. characterised by position
L60R11/00P1:	. . inside the vehicle
L60R11/00P1A:	. . . Dashboard
L60R11/00P1B:	. . . Mid-console
L60R11/00P1C:	. . . Ventilation grilles
L60R11/00P1D:	. . . Vehicle control means, e.g. steering-wheel or column
L60R11/00P1F:	. . . Seats or parts thereof
L60R11/00P1F2:	. . . . Arm-rests
L60R11/00P1F4:	. . . . Back-rests
L60R11/00P1F6:	. . . . Head-rests
L60R11/00P1H:	. . . Side or rear panels
L60R11/00P1H2:	. . . . Doors
L60R11/00P1H4:	. . . . Pillars
L60R11/00P1H6:	. . . . Rear shelves
L60R11/00P1K:	. . . Windows, e.g. windscreen
L60R11/00P1L:	. . . Ceiling, e.g. roof rails
L60R11/00P1M:	. . . Floor, e.g. side sills, fire wall
L60R11/00P1N:	. . . Seat belts
L60R11/00P1P:	. . . Rear-view mirrors
L60R11/00P1R:	. . . Sun visors
L60R11/00P1T:	. . . Luggage compartment
L60R11/00P1V:	. . . Engine compartment
L60R11/00P3:	. . outside the vehicle
L60R11/00R:	. characterised by mounting means
L60R11/00R2:	. . for integrated articles, i.e. not substantially protruding from the surrounding parts [M1204]
L60R11/00R2A:	. . . with visible part, e.g. flush mounted
L60R11/00R2A1:	. . . . using hidden fastening means
L60R11/00R4:	. . for non integrated articles
L60R11/00R4A:	. . . Connection with the vehicle part
L60R11/00R4A1:	. . . . using screws, bolts, rivets or the like
L60R11/00R4A11:	. . . . using key-type connections
L60R11/00R4A15:	. . . . using adhesive means, e.g. hook and loop fasteners
L60R11/00R4A3:	. . . . using cigarette lighter
L60R11/00R4A5:	. . . . using suction cups
L60R11/00R4A7:	. . . . using magnetic means
L60R11/00R4A9:	. . . . using clips, clamps, straps or the like
L60R11/00R4B:	. . . Connection with the article
L60R11/00R4B1:	. . . . using screws, bolts, rivets or the like
L60R11/00R4B11:	. . . . using key-type connections
L60R11/00R4B13:	. . . . using a containment or docking space
L60R11/00R4B15:	. . . . using adhesive means, e.g. hook and loop fasteners
L60R11/00R4B5:	. . . . using suction cups
L60R11/00R4B7:	. . . . using magnetic means
L60R11/00R4B9:	. . . . using latches, clips, clamps, straps or the like
L60R11/00R4C:	. . . Quick-disconnect two-parts mounting means
L60R11/00R6:	. . Adjustable or movable supports [M1204]
L60R11/00R6A:	. . . collapsible, e.g. for storing after use
L60R11/00R6C:	. . . with adjustment by linear movement in their operational position
L60R11/00R6D:	. . . with adjustment by rotation in their operational position
L60R11/00R6D1:	. . . . around two axes
L60R11/00R6D3:	. . . . around three axes, i.e. universally mounted
L60R11/00R6D3F:	. . . . . the article being mounted on a flexible shaft
L60R11/00R6M:	. . . with motorization [M1204]
L60R11/00T:	. characterised by means for covering after user, e.g. boxes, shutters or the like
L60R11/00W:	. Theft prevention of articles
L60R11/00W2:	. . using electric or electronic means, e.g. alarms, codes
L60R11/02:	. for radio sets, television sets, telephones or the like; Arrangements of control thereof
L60R11/02A:	. . for radio sets
L60R11/02A3:	. . . not to be used, transfered to 11/02g (1 doc left)
L60R11/02C:	. . for record carrier apparatus, e.g. video recorders, tape players or CD players
L60R11/02C5:	. . . not to be used, transfered to l60r11/00p1h (empty)
L60R11/02C5P:	. . . . not to be used, transfered to l60r11/00p1h4 (1 doc left)
L60R11/02D:	. . for loud-speakers
L60R11/02D2:	. . . of flat type
L60R11/02E:	. . for displays, e.g. cathodic tubes
L60R11/02E1:	. . . not to be used
L60R11/02E1A:	. . . . not to be used; 1 doc left
L60R11/02E2:	. . . of flat type, e.g. LCD
L60R11/02E4:	. . . not to be used; 1 doc left
L60R11/02E8:	. . . not to be used, transfered to l60r11/02s (1 doc left)
L60R11/02G:	. . for telephones
L60R11/02H:	. . for microphones or earphones
L60R11/02J:	. . for personal computers, e.g. laptops, notebooks
L60R11/02K:	. . for navigation systems
L60R11/02P:	. . for control means
L60R11/02Q:	. . for Din-sized apparatus
L60R11/02R:	. . for rear passenger use
L60R11/02S:	. . for the use of several passengers, e.g. simultaneously
L60R11/02T:	. . Apparatus made of several modules independently mounted
L60R11/02W:	. . Apparatus with multi-functionalities, e.g. radio and telephone [M1204]
L60R11/04:	. Mounting of cameras operative during drive; Arrangement of controls thereof relative to the vehicle
L60R11/06:	. for tools or spare parts
L60R13/00:	Elements for body-finishing, identifying, or decorating; Arrangements or adaptations for advertising purposes
L60R13/00B:	. Manufacturer's emblems, name plates, bonnet ornaments, mascots or the like; Mounting means therefor
L60R13/01:	. Liners for load platforms or load compartments
L60R13/01B:	. . for internal load compartments, e.g. car trunks
L60R13/01B2:	. . . comprising removable or hinged parts, e.g. for accessing storage compartments
L60R13/01Q:	. . made of a plurality of visible parts
L60R13/01R:	. . integrating other functions or accessories
L60R13/01T:	. . Connection or positioning of adjacent panels
L60R13/02:	. Internal trim mouldings; Internal ledges; Wall liners for passenger compartments; Roof liners
L60R13/02B:	. . Arrangements of fasteners and clips specially adapted for attaching inner vehicle liners or mouldings
L60R13/02C:	. . Roof or head liners
L60R13/02C1:	. . . supported by adhesion with the roof panel
L60R13/02C2:	. . . Self supporting head liners
L60R13/02C3:	. . . specially adapted for roofs with openings
L60R13/02D:	. . Side or rear panels
L60R13/02D2:	. . . Doors
L60R13/02D4:	. . . Pillars; Roof rails
L60R13/02G:	. . dashboard liners
L60R13/02H:	. . Mid-console liners
L60R13/02K:	. . Rear parcel liners
L60R13/02P:	. . comprising removable or hinged parts
L60R13/02Q:	. . made of a plurality of visible parts
L60R13/02R:	. . integrating other functions or accessories
L60R13/02T:	. . Connection or positioning of adjacent panels
L60R13/04:	. External ornamental or guard strips; Ornamental inscriptive devices thereon
L60R13/04B:	. . Door edge guards
L60R13/04C:	. . Foot boards
L60R13/05:	. Foot board
L60R13/06:	. Sealing strips
L60R13/07:	. Water drainage or guide means not integral roof structure
L60R13/08:	. Insulating elements
L60R13/08A:	. . Arrangements of fasteners or clips specially adapted therefore
L60R13/08B:	. . Acoustic or thermal insulation of passenger compartments
L60R13/08B1:	. . . Insulating partitions, e.g. between front and rear seats
L60R13/08B2:	. . . for fire walls or floors
L60R13/08C:	. . for engine compartments
L60R13/08D:	. . for duct, cable or rod passages, e.g. between engine and passenger compartments
L60R13/08D2:	. . . specially adapted for movable parts, e.g. gears levers, pedals
L60R13/08F:	. . for covering undersurfaces of vehicles, e.g. wheel houses
L60R13/08H:	. . for protecting heat sensitive parts, e.g. electronic components
L60R13/08K:	. . for mounting around heat sources, e.g. exhaust pipes
L60R13/08L:	. . for mounting around noise sources, e.g. air blowers
L60R13/08N:	. . for humidity insulation
L60R13/10:	. Registration, licencing, or like devices
L60R13/10B:	. . Licence- or registration plates, provided with mounting means, e.g. frames, holders, retainers, brackets
L60R15/00:	Arrangements or adaptations of sanitation devices
L60R15/02:	. Washing facilities in railway vehicles B61D35/00B
L60R15/04:	. Toilet facilities in railway vehicles B61D35/00C
L60R16/00:	Electric or fluid circuits specially adapted for vehicles and not otherwise provided for; Arrangement of elements of electric or fluid circuits specially adapted for vehicles and not otherwise provided for
L60R16/00A:	. Electro-mechanical devices, e.g. switched electric switches in general H01H
L60R16/02:	. electric
L60R16/023:	. . for transmission of signals between vehicle parts or subsystems
L60R16/023D:	. . . [N:Circuits relating to the driving or the functioning of the vehicle (for dash boards B60K37/00, B60Q3/04; for indicating emergencies B60Q1/52; registering or indicating the working of vehicles G07C5/00; measuring distance G01C, e.g. combinations of speed and distance G01C23/00; engine indicators G01L; measuring speed or acceleration G01P; brake control systems B60T; monitoring tyres B60C23/00; indicating overspeed B60K31/00)]
L60R16/023D3:	. . . . [N: for measuring vehicle parameters and indicating critical, abnormal or dangerous conditions]
L60R16/023D3F:	. . . . . [N: Vehicle tilting, overturning or roll over]
L60R16/023D3H:	. . . . . [N: related to maintenance or repairing of vehicles]
L60R16/023D5:	. . . . [N: for lighting devices combined with starting or ignition devices for road vehicles]
L60R16/023D7:	. . . . [N: for economical driving]
L60R16/023G:	. . . [N: circuits concerning the atmospheric environment (meteorology G01W)]
L60R16/023K:	. . . [N: Electrical distribution centers]
L60R16/023L:	. . . [N: Electronic boxes]
L60R16/027:	. . . between relatively movable parts of the vehicle, e.g. between steering wheel and column [N: (devices for measuring, signalling or controlling tyre pressure or temperature specially adapted for mounting on vehicles B60C23/00)]
L60R16/02C:	. . Wire harnesses
L60R16/02C2:	. . . Protecting, fastening and routing means therefor
L60R16/02C2A:	. . . . Grommets
L60R16/03:	. . for supply of electrical power to vehicle subsystems
L60R16/033:	. . . characterised by the use of electrical cells or batteries (for propulsion puposes B60K1/04; supplying batteries to, or removing batteries from, vehicles B60S5/06; testing of charge state G01R31/36)
L60R16/037:	. . for occupant comfort, [N: e.g. for automatic adjustment of appliances according to personal settings, e.g. seats, mirrors, steering wheel]
L60R16/037B:	. . . [N: Voice control (in general G10L)]
L60R16/037D:	. . . [N: Gear-shift lever position (indicating position of controlling members in general G05G1/00)]
L60R16/03G:	. . . [N: using generators driven by a machine different from the vehicle motor]
L60R16/03M:	. . . using multiplexing techniques
L60R16/03M1:	. . . . Temporary code for documents to be reclassified to G08C, H04L or H04Q
L60R16/04:	. . Arrangement of batteries
L60R16/06:	. . for removing electrostatic charges
L60R16/08:	. fluid
L60R17/00:	Arrangements or adaptations of lubricating systems or devices
L60R17/02:	. Systems, e.g. central lubrication systems
L60R19/00:	Wheel guards; Radiator guards, e.g. grilles; Obstruction removers; Fittings damping bouncing force in collisions
L60R19/00A:	. Wheel guards
L60R19/00C:	. Crash attenuators, i.e. means added to highway service vehicles for softening high speed impacts
L60R19/00G:	. Use of vehicle wheels for damping bouncing force
L60R19/00L:	. Means for adjusting or regulating the crash absorption capacity of the vehicle, e.g. when detecting an impending collision
L60R19/02:	. Bumpers, i.e. impact receiving or absorbing members for protecting vehicles or fending off blows from other vehicles or objects
L60R19/26S:	. . . . using springs made of non elastomeric plastic material
L60R19/02B:	. . Details
L60R19/02C:	. . Buffers, i.e. bumpers of limited extent
L60R19/03:	. . characterised by material, e.g. composite
L60R19/04:	. . formed from more than one section in a side-by-side arrangement
L60R19/12:	. . . vertically spaced
L60R19/14:	. . . having folding parts
L60R19/16:	. . . having deflecting members, e.g. rollers, balls
L60R19/18:	. . characterised by the cross-section; Means within the bumper to absorb impact
L60R19/18B:	. . . Structural beams therefor, e.g. shock-absorbing
L60R19/18B2:	. . . . made of metal
L60R19/18B2E:	. . . . . of light metal, e.g. extruded
L60R19/18B2H:	. . . . . of high-tension steel
L60R19/18B3:	. . . . made of plastic material
L60R19/18B3B:	. . . . . Blow moulded
L60R19/18B3C:	. . . . . comprising a cellular structure
L60R19/18B3R:	. . . . . of reinforced plastic material
L60R19/18E:	. . . Additional energy absorbing means supported on bumber beams, e.g. cellular structures or material
L60R19/18E1:	. . . . Cellular structures
L60R19/18E2:	. . . . Cellular materials
L60R19/18E3:	. . . . Blow molded structures
L60R19/18F:	. . . Bumper fascias and fastening means therefor
L60R19/18P:	. . . comprising a multiplicity of identical adjacent shock-absorbing means
L60R19/20:	. . . containing mainly gas or liquid, e.g. inflatable
L60R19/20C:	. . . . inflatable in the direction of an obstacle upon impending impact, e.g. using air bags
L60R19/22:	. . . containing mainly cellular material, e.g. solid foam
L60R19/24:	. . Arrangements for mounting bumpers on vehicles
L60R19/24D:	. . . on two vertical sleeves, e.g. on energy absorber ends
L60R19/24M:	. . . with adjusting means to compensate manufacturing tolerances, e.g. between bumper and energy absorbers
L60R19/24R:	. . . Fastening of bumpers` side ends
L60R19/26:	. . . comprising yieldable mounting means
L60R19/26L:	. . . . with means to adjust or regulate the amount of energy to be absorbed
L60R19/26M:	. . . . using cellular structures
L60R19/26R:	. . . . using friction sufaces
L60R19/26W:	. . . . with rebound preventing means, e.g. ratchets
L60R19/28:	. . . . Metallic springs
L60R19/28B:	. . . . . comprising only leaf springs, e.g. the mounting means forming part of the guard itself
L60R19/30:	. . . . Elastomeric material
L60R19/32:	. . . . Fluid shock absorbers, e.g. with coaxial coil springs
L60R19/34:	. . . . destroyed upon impact, e.g. one-shot type
L60R19/36:	. . . . Combinations of yieldable mounting means of different types
L60R19/38:	. . . adjustably or movably mounted, e.g. horizontally displaceable for securing a space between parked vehicles
L60R19/40:	. . . . in the direction of an obstacle before a collision, or extending during driving of the vehicle, i.e. to increase the energy absorption capacity of the bumper
L60R19/42:	. . extending primarily along the sides of, or completely encircling, a vehicle
L60R19/44:	. . Bumper guards
L60R19/44C:	. . . Guard strips
L60R19/46:	. . . spring- or pivotally-mounted
L60R19/48:	. . combined with, or convertible into, other devices or objects, e.g. bumpers combined with road brushes, bumpers convertible into beds
L60R19/48D:	. . . with obstacle sensors of electric or electronic types
L60R19/48H:	. . . with air passages, e.g. for cooling
L60R19/50:	. . . with lights or registration plates
L60R19/50L:	. . . . with lights
L60R19/52:	. Radiator or grille guards
L60R19/52B:	. . Bull bars
L60R19/52G:	. . Radiator grilles
L60R19/52G3:	. . . integral with bumpers
L60R19/54:	. Obstruction removers or deflectors
L60R19/54B:	. . Devices for cutting wire-type obstructions
L60R19/56:	. Fittings damping bounding force in truck collisions, e.g. bumpers; Arrangements on high-riding vehicles, e.g. lorries, for preventing vehicles or objects from running thereunder
L60R19/56B:	. . on vehicle sides
L60R21/00:	Arrangements or fittings on vehicles for protecting or preventing injuries to occupants or pedestrians in case of accidents or other traffic risks
L60R21/00A:	. Type of accident
L60R21/00A1:	. . Frontal collision
L60R21/00A10:	. . Offset collision
L60R21/00A11:	. . Pole collision
L60R21/00A2:	. . Lateral collision
L60R21/00A3:	. . Oblique collision
L60R21/00A4:	. . Rear collision or recoiling bounce after frontal collision
L60R21/00A6:	. . Free fall
L60R21/00A7:	. . Fall in water
L60R21/00A8:	. . Roll-over
L60R21/00A9:	. . Underrun collision
L60R21/00C:	. Post collision measures, e.g. notifying emergency services
L60R21/00P:	. characterised by occupant or pedestian
L60R21/00P1:	. . Position of passenger
L60R21/00P1R:	. . . lying down
L60R21/00P1S:	. . . standing
L60R21/00P2:	. . Body parts of the occupant or pedestrian affected by the accident
L60R21/00P2A:	. . . Arms
L60R21/00P2C:	. . . Chest
L60R21/00P2F:	. . . Feet
L60R21/00P2H:	. . . Head
L60R21/00P2K:	. . . Knees
L60R21/00P2L:	. . . Legs
L60R21/00P2P:	. . . Pelvis
L60R21/00P2S:	. . . Shoulders
L60R21/00P3:	. . Type of passenger
L60R21/00P3F:	. . . woman, e.g. pregnant
L60R21/00T:	. Type of vehicles
L60R21/00T10:	. . Boats
L60R21/00T11:	. . Amusement vehicles
L60R21/00T2:	. . Buses
L60R21/00T3:	. . Trailers, e.g. caravans
L60R21/00T4:	. . Convertible cars
L60R21/00T5:	. . Utility vehicles
L60R21/00T5A:	. . . Agricultural vehicles, e.g. tractors
L60R21/00T5F:	. . . Fork-lift trucks
L60R21/00T5K:	. . . Working vehicles
L60R21/00T5P:	. . . Pick-up trucks; Light trucks; Sport utility vehicles
L60R21/00T6:	. . Racing cars
L60R21/00T7:	. . Cycles, e.g. motorcycles
L60R21/00T8:	. . Railway vehicles
L60R21/00T9:	. . Aircraft
L60R21/01:	. Electrical circuits for triggering passive safety arrangements, e.g. airbags, safety belt tighteners, in case of vehicle accidents or impending vehicle accidents
L60R21/013:	. . including means for detecting collisions, impending collision or roll-over
L60R21/0132:	. . . responsive to vehicle motion parameters
L60R21/0132T:	. . . . comprising variable thresholds, e.g. depending from other collision parameters
L60R21/0132V:	. . . . Vertical acceleration
L60R21/0132W:	. . . . Angular velocity or angular acceleration
L60R21/0134:	. . . responsive to emminent contact with an obstacle, e.g. using radar systems
L60R21/0134M:	. . . . using mechanical sensing means
L60R21/0136:	. . . responsive to actual contact with an obstacle, e.g. to vehicle deformation, bumper displacement or bumper velocity relative to the vehicle
L60R21/013B:	. . . monitoring vehicle body vibrations or noise
L60R21/013F:	. . . monitoring rough road condition
L60R21/013G:	. . . monitoring vehicle inclination
L60R21/013K:	. . . monitoring distance between vehicle body and road
L60R21/013M:	. . . monitoring the braking system, e.g. ABS
L60R21/013P:	. . . monitoring the vehicle steering system or the dynamic control system
L60R21/013R:	. . . monitoring occupant displacement
L60R21/013T:	. . . monitoring seat belt tensiont
L60R21/015:	. . including means for detecting the presence or position of passengers, passenger seats or child seats; Including means for controlling the safety arrangement actuation parameters in relation to external conditions; Inhibition means for cases of useless or dangerous conditions, e.g. passengers out of position
L60R21/015D:	. . . monitoring bag displacement
L60R21/015F:	. . . monitoring forces or pressure in bag or module
L60R21/015G:	. . . Passenger detection systems
L60R21/015G2:	. . . . using force or pressure sensing means
L60R21/015G4:	. . . . mounted on the bad
L60R21/015G6:	. . . . using field detection presence sensor
L60R21/015G6B:	. . . . . using electric or capacitive field sensors
L60R21/015G6D:	. . . . . using electromagnetic waves, e.g. infrared
L60R21/015G6F:	. . . . . using ultrasonic waves
L60R21/015G6H:	. . . . . for image processing, e.g. cameras, sensor arrays
L60R21/015G7:	. . . . monitoring passenger motion
L60R21/015G8:	. . . . monitoring seat belt, e.g. length, height-adjustment, tension
L60R21/015G8C:	. . . . . using belt buckle sensors
L60R21/015G8E:	. . . . . sensing amount of belt winded on retractor
L60R21/015G8G:	. . . . . sensing belt tension
L60R21/015G9:	. . . . monitoring specific human body parts, e.g. face, eyes, hands
L60R21/015J:	. . . Seat position sensors
L60R21/015L:	. . . Children seat detection system
L60R21/015N:	. . . monitoring crash strength
L60R21/015N3:	. . . . deceleration dependent
L60R21/015N5:	. . . . speed dependent
L60R21/015P:	. . . Manually or key actuated inhibition switches
L60R21/015R:	. . . Devices for warning in case of inhibition
L60R21/017:	. . including arrangements for providing electric power to safety arrangements or their actuating means, e.g. to pyrotechnic fuses or electro-mechanic valves
L60R21/017D:	. . . Diagnostic or recording means therefor
L60R21/017D3:	. . . . for firing circuits using only mechanical switches as collision detecting means, in series with pyrotechnic fuses
L60R21/01A:	. . Mounting of electrical components in vehicles
L60R21/01C:	. . Means for detecting collision, impending collision or roll-over
L60R21/01C1:	. . . the monitored value being used for calculating occupant displacement
L60R21/01C2:	. . . Safing sensors
L60R21/01H:	. . to be deleted see doc.14 R06-0163
L60R21/01H3:	. . . to be deleted see doc.14 R06-0163
L60R21/01H3T:	. . . . monitoring seat temperature
L60R21/01H6:	. . . depending from programmable settings or informations, e.g. age, sex; Means for evaluating biomechanic parameters of occupants
L60R21/01H7:	. . . to be deleted see doc.14 R06-0163
L60R21/01H7V:	. . . . with adaptation of inflation in relation to collision evolution
L60R21/01K:	. . Controlling a plurality of restraint devices
L60R21/01L:	. . Communication circuits for data transmission
L60R21/01L5:	. . . Architecture
L60R21/01L5A:	. . . . Bus
L60R21/01L5A1:	. . . . . between the airbag system and other vehicle electronic systems
L60R21/01L5A3:	. . . . . between different sensors and airbag control unit
L60R21/01L5A5:	. . . . . between the airbag control unit and pyrotechnic fuses or equivalent actuators
L60R21/01L6:	. . . Transmission medium
L60R21/01L6A:	. . . . wireless
L60R21/01L6B:	. . . . optical
L60R21/01L7:	. . . Transmission method
L60R21/01L7A:	. . . . power and data signal using transmission medium
L60R21/01L7B:	. . . . specific data frames
L60R21/01N:	. . Prevention of malfunction
L60R21/01N1:	. . . Problems or faults
L60R21/01N1A:	. . . . Cut lines
L60R21/01N1B:	. . . . Short circuits
L60R21/01N1C:	. . . . Current leakage
L60R21/01N1D:	. . . . Current or voltage overload
L60R21/01N1E:	. . . . Insufficient current or voltage
L60R21/01N1F:	. . . . Noise
L60R21/01N1G:	. . . . Misdeployment, e.g. during assembly, disassembly, accident salvage or recycling
L60R21/01N3:	. . . Fault detection or diagnostic circuits
L60R21/01N3A:	. . . . Plausibility check
L60R21/01N3B:	. . . . Warning devices
L60R21/01P:	. . Actuation parameters of safety arrangents
L60R21/01P1:	. . . Expansion of air bags
L60R21/01P1A:	. . . . control of expansion speed
L60R21/01P1B:	. . . . control of expansion volume
L60R21/01P1C:	. . . . control of expansion timing or sequence
L60R21/01P1D:	. . . . control of expansion shape
L60R21/01P1E:	. . . . selection of seat for bag expansion
L60R21/01P3:	. . . Devices other than bags
L60R21/01P3A:	. . . . Brakes
L60R21/01P3B:	. . . . Seat belts
L60R21/01P3B1:	. . . . . Belt tensioners
L60R21/01P3B3:	. . . . . Load limiters
L60R21/01R:	. . Electronic control units
L60R21/01R3:	. . . programmable for use in different vehicles or with different airbags configurations
L60R21/02:	. Occupant safety arrangements or fittings, e.g. crash pads
L60R21/20A:	. . . . Packaging tethers or envelopes for inflatable members
L60R21/26H:	. . . . Diffusors or gas deflecting means
L60R21/26J:	. . . . Gas guiding means, e.g. ducts
L60R21/26J3:	. . . . . for diverting the gas in a plurality of bags
L60R21/26J5:	. . . . . Curtain bag nozzles
L60R21/26L:	. . . . with a plurality of inflation levels
L60R21/26L3:	. . . . . The volume of inflation gas being continuously adjustable
L60R21/02A:	. . Self-supporting restraint systems, e.g. restraining arms, plates or the like
L60R21/02A2:	. . . mounted on floor
L60R21/02A3:	. . . mounted on seats
L60R21/02A4:	. . . mounted on fire wall
L60R21/02A5:	. . . mounted on steering-wheel
L60R21/02A6:	. . . mounted on dash-board
L60R21/02A7:	. . . mounted on side walls
L60R21/02A8:	. . . mounted on roof
L60R21/02B:	. . Rigid partitions inside vehicles, e.g. between passengers and load compartments
L60R21/02B5:	. . . comprising energy absorbing means
L60R21/02L:	. . automatically movable to an operative position, e.g. in case of collision or impending collision
L60R21/02M:	. . Means preventing passenger from falling out of vehicles
L60R21/02P:	. . Padded or energy absorbing driving control initiating means, e.g. gear lever, pedals
L60R21/02V:	. . Additional pads or cushions in vehicle compartments, e.g. movably mounted
L60R21/34A:	. . using airbags
L60R21/34B:	. . using means for lifting the bonnet
L60R21/04:	. . Padded linings for the vehicle interior; Energy absorbing structures associated with padded or non-padded linings
L60R21/045:	. . . associated with the instrument panel or dashboard
L60R21/04A:	. . . using gas or liquid as energy absorbing means
L60R21/04C:	. . . using energy absorbing ribs
L60R21/04D:	. . . using honeycomb structures
L60R21/04F:	. . . associated with the side doors or panels
L60R21/04P:	. . . associated with the side or roof pillars
L60R21/04R:	. . . associated with the roof panel
L60R21/05:	. . . associated with the steering wheel, steering hand lever or steering column
L60R21/055:	. . Padded or energy-absorbing fittings, e.g. seat belt anchors
L60R21/06:	. . Safety nets, transparent sheets, curtains, or the like, e.g. between occupants and glass
L60R21/06E:	. . . comprising energy absorbing mounting means
L60R21/08:	. . . automatically movable from an inoperative to an operative position, e.g. in a collision
L60R21/09:	. . Control elements or operating handles movable from an operative to an out-of-the way position
L60R21/11:	. . Overhead guards, e.g. against loads falling down
L60R21/12:	. . which protect the occupants against personal attack from the inside or the outside of the vehicle
L60R21/13:	. . Roll-over protection
L60R21/13B:	. . . Protective devices for drivers in case of overturning of tractors
L60R21/13C:	. . . Roll bars for convertible vehicles
L60R21/13C3:	. . . . movable from a retracted to a protection position
L60R21/13C3A:	. . . . . automatically during an accident
L60R21/13G:	. . . Reinforcement cages for closed vehicle bodies
L60R21/13T:	. . . using external airbags
L60R21/16:	. . Inflatable occupant restraints or confinements designed to inflate upon impact or impending impact, e.g. air bags
L60R21/16C:	. . . characterised by additional means for controlling deployment trajectory
L60R21/16D:	. . . Means for diverting, destroying or blocking the bag in case of dangerous deployment, e.g. during rescue operations or use of rear-facing children seats
L60R21/16H:	. . . combined with vehicle venting means for reducing or avoiding the passenger compartment overpressure during inflation
L60R21/16R:	. . . reusable, e.g. in case of multiple collisions
L60R21/16V:	. . . comprising anti-theft devices
L60R21/16W:	. . . for restraining luggages
L60R21/18:	. . . the inflatable member formed as a belt or harness or combined with a belt or harness arrangement
L60R21/20:	. . . Arrangements for storing inflatable members in their non-use or deflated condition; Arrangement or mounting of air bag modules or components
L60R21/201:	. . . . Packaging straps or envelopes for inflatable members [M2010.12]
L60R21/203:	. . . . in steering wheels or steering columns
L60R21/203F:	. . . . . the inflator or inflatable member not being rotatable with the steering wheel; Arrangements using the steering column or steering wheel rim for storing, supplying or evacuating the inflation gas or for storing the inflatable member
L60R21/203H:	. . . . . using modules containing inflator, bag and cover attachable to the steering wheel as a complete sub-unit
L60R21/203H2:	. . . . . . the module or a major component thereof being yieldably mounted, e.g. for actuating the horn switch or protecting the driver in a non-deployment situation
L60R21/205:	. . . . in dashboards
L60R21/206:	. . . . . in the lower part of dashboards, e.g. for protecting the knees [M2010.12]
L60R21/207:	. . . . in vehicle seats
L60R21/207C:	. . . . . in children's seats
L60R21/207F:	. . . . . in head rests
L60R21/207H:	. . . . . Removable covers with tear seams
L60R21/207R:	. . . . . in rear seats
L60R21/21:	. . . . in vehicle side panels, e.g. doors
L60R21/213:	. . . . in vehicle roof frames or pillars [M2010.12]
L60R21/214:	. . . . in roof panels [M2010.12]
L60R21/215:	. . . . characterised by the covers for the inflatable member
L60R21/2155:	. . . . . with complex motion of the cover; retraction under the lining during opening
L60R21/215A:	. . . . . comprising tearing tabs, legs or the like for holding the lid before deployment
L60R21/215B:	. . . . . comprising tear lines defining a deployment opening
L60R21/215B3:	. . . . . . Steering wheel pads or similar cup-shaped lids
L60R21/215B3D:	. . . . . . . with integrated switches, e.g. horn switches
L60R21/215B5:	. . . . . . the tearing being done or assisted by cutters
L60R21/215B7:	. . . . . . the tearing being done or assisted by heating or pyrotechnic means
L60R21/215D:	. . . . . the lid being displaced towards the occupant during deployment (L60R21/216B, L60R21/215L take precedence)
L60R21/215F:	. . . . . with complex motion of lid, e.g. for retraction under lining during opening
L60R21/215H:	. . . . . comprising tether means for limitation of lid motion during deployment
L60R21/215H2:	. . . . . . the lid being displaced towards the occupant during deployment
L60R21/215H4:	. . . . . . with energy absorbing or elastic means
L60R21/215J:	. . . . . comprising a lock unlocked during deployment
L60R21/215L:	. . . . . the lid being fixed on the bag, or forming part of the bag wall, or the bag itself being used as wall liner
L60R21/215N:	. . . . . using a strechable wall liner
L60R21/215P:	. . . . . characterised by hinges
L60R21/215R:	. . . . . with emblems
L60R21/216:	. . . . . comprising tether means for limitation of cover motion during deployment
L60R21/2165:	. . . . . characterised by a tear line for defining a deployment opening
L60R21/2165C:	. . . . . . the tearing being done or assisted by cutters
L60R21/2165H:	. . . . . . the tearing being done or assisted by heating or pyrotechnic means
L60R21/2165S:	. . . . . . Steering wheel covers or similar cup-shaped covers
L60R21/2165S2:	. . . . . . . with integrated switches, e.g. horn switches
L60R21/216B:	. . . . . . the cover being displaced towards the occupant during deployment
L60R21/216D:	. . . . . . with energy absorbing or elastic means
L60R21/217:	. . . . Inflation fluid source retainers, e.g. reaction canisters; Connection of bags, covers, diffusers or inflation fluid sources therewith or together [M2010.12]
L60R21/217D:	. . . . . specially adapted for elongated cylindrical or bottle-like inflators with a symmetry axis perpendicular to the main direction of bag deployment, e.g. extruded reaction canisters
L60R21/217E:	. . . . . the cover being connected to the surrounding part and to the module, e.g. floating mounts
L60R21/217G:	. . . . . the module or part thereof being movably mounted on the vehicle
L60R21/217G2:	. . . . . . using energy absorbing means
L60R21/217J:	. . . . . the air bag components being completely enclosed in a soft or semi-rigid housing or cover
L60R21/217M:	. . . . . Reaction canisters characterised by material
L60R21/217M1:	. . . . . . Plastic
L60R21/23:	. . . inflatable members
L60R21/231:	. . . . characterised by their construction, spatial configuration or shape
L60R21/231C:	. . . . . the bag being integrated in a multi-bag system
L60R21/231D:	. . . . . with inflatable support compartments creating an internal suction volume
L60R21/231E:	. . . . . comprising tear seams to control deployment or energy-absorption
L60R21/231H:	. . . . . Heat protection panels
L60R21/231K:	. . . . . comprising sensitive compartments
L60R21/231L:	. . . . . specially adapted for side protection
L60R21/231L3:	. . . . . . seat mounted
L60R21/231M:	. . . . . specially adapted for rear seat passengers
L60R21/231N:	. . . . . specially adapted for protecting at least two passengers, e.g. preventing them from hitting each other
L60R21/231P:	. . . . . specially adapted for knee protection
L60R21/231R:	. . . . . specially adapted for foot protection
L60R21/231T:	. . . . . Tubular air bags connected to the vehicle at their two extremities
L60R21/231V:	. . . . . Curtain-type air bags, i.e. air bags deploying mainly in a vertical direction from their top edge
L60R21/231W:	. . . . . Roof bags, i.e. protecting the occupant in a roll-over situation
L60R21/232:	. . . . . Curtain-type airbags deploying mainly in a vertical direction from their top edge
L60R21/233:	. . . . . comprising a plurality of individual compartments; comprising two or more bag-like members, one within the other [M1111]
L60R21/2334:	. . . . . Expansion regulating feature
L60R21/2338:	. . . . . . Tethers
L60R21/2338B:	. . . . . . . Internal tether means
L60R21/2338B1:	. . . . . . . . having ends which are movable or detachable during deployment
L60R21/2338D:	. . . . . . . External tether means
L60R21/2338D1:	. . . . . . . . having ends which are movable or detachable during deployment
L60R21/233A:	. . . . . . the individual compartments defining the external shape of the bag
L60R21/233B:	. . . . . Internal tether means
L60R21/233B1:	. . . . . . having ends which are movable or detachable during deployment
L60R21/233D:	. . . . . External tether means
L60R21/233D1:	. . . . . . having ends which are movable or detachable during deployment
L60R21/233F:	. . . . . . Inner seams, e.g. creating separate compartments or used as tethering means
L60R21/233H:	. . . . . . Inner walls crating separate compartments, e.g. communicating with vents
L60R21/233H2:	. . . . . . . using independent bags, one within the other
L60R21/233J:	. . . . . Soft diffusors or gas deflecting means inside bags
L60R21/2342:	. . . . . . Tear seams
L60R21/2346:	. . . . . . Soft diffusers
L60R21/235:	. . . . characterised by their material, e.g. coating or by manufacturing process
L60R21/235M:	. . . . . characterised by material
L60R21/235M1:	. . . . . . Fabric
L60R21/235M1C:	. . . . . . . coated fabric
L60R21/235M3:	. . . . . . Resin (for coating fabric L60R21/235M1C)
L60R21/235M5:	. . . . . . Composite
L60R21/235M7:	. . . . . . Metal
L60R21/235P:	. . . . . characterised by the manufacturing process
L60R21/235P1:	. . . . . . Sewing
L60R21/235P2:	. . . . . . Weaving
L60R21/235P2G:	. . . . . . . one piece weaving
L60R21/235P4:	. . . . . . Knitting
L60R21/235P6:	. . . . . . Molding
L60R21/235P7:	. . . . . . Sealing
L60R21/235P8:	. . . . . . Nesting of panels, i.e. for material utilisation
L60R21/235S:	. . . . . characterised by connections between panels
L60R21/235S1:	. . . . . . Sewing
L60R21/235S4:	. . . . . . Bonding
L60R21/235S5:	. . . . . . Vulcanisation
L60R21/235S6:	. . . . . . Welding
L60R21/235S8:	. . . . . . Sealing
L60R21/237:	. . . . characterised by the way they are folded
L60R21/237C:	. . . . . Folding devices
L60R21/239:	. . . . characterised by their valves or venting means
L60R21/239L:	. . . . . comprising means to control the venting
L60R21/26:	. . . characterised by the source or generator of inflation fluid or the means to control such fluid flow from the source to the inflatable member
L60R21/261:	. . . . with means other than bag structure to diffuse or guide inflation fluid
L60R21/261J:	. . . . . Gas guiding means, e.g. ducts
L60R21/261J3:	. . . . . . for diverting the gas into a plurality of bags
L60R21/261J5:	. . . . . . Curtain bag nozzles
L60R21/262:	. . . . . Elongated tubular diffusers, e.g. curtain-type
L60R21/263:	. . . . Variable source, e.g. plural stage or controlled output
L60R21/263L:	. . . . . with a plurality of inflation levels
L60R21/263L3:	. . . . . . The volume of gas being continuously adjustable
L60R21/264:	. . . . using instantaneous generation of gas
L60R21/264A:	. . . . . comprising a plurality of combustion chambers or sub-chambers
L60R21/264C:	. . . . . using only solid reacting substances
L60R21/264C3:	. . . . . . the reacting substances being supported by the inflatable member walls, or by a flexible support within it
L60R21/264C5:	. . . . . . comprising a plurality of combustion chambers or sub-chambers
L60R21/268:	. . . . using instantaneous release of stored pressurised gas
L60R21/268C:	. . . . . comprising a plurality of pressure chambers
L60R21/26A:	. . . . the inflation fluid being transferred to the inflatable member due to mechanical deformation of the fluid container by impact
L60R21/26B:	. . . . using a filter through which the inflation gas passes
L60R21/26C:	. . . . a cooling agent being added to the inflation fluid
L60R21/26F:	. . . . for filling the bag with foam
L60R21/26K:	. . . . Ignitors
L60R21/26K1:	. . . . . triggered by mechanical means
L60R21/26K3:	. . . . . of elongated shape
L60R21/26K5:	. . . . . of film shape
L60R21/26K7:	. . . . . using fluid materials
L60R21/26M:	. . . . using a combination of inflators
L60R21/26P:	. . . . characterised by auto-ignition means
L60R21/26R:	. . . . characterised by heating or heat insulating means, e.g. for use under extreme temperatures
L60R21/26T:	. . . . characterised by casing
L60R21/26T3:	. . . . . Material
L60R21/26T3P:	. . . . . . Plastic
L60R21/26V:	. . . . characterised by fluid flow controlling valves
L60R21/272:	. . . . . with means for increasing the pressure of the gas when inflation is required, e.g. hybrid inflators (by combustion of the pressurised gas L60R21/264)
L60R21/272F:	. . . . . . using a fluid fuel gas generator
L60R21/274:	. . . . . characterised by means to rupture or open the fluid source
L60R21/276:	. . . . with means to vent the inflation fluid source, e.g. in case of overpressure
L60R21/276L:	. . . . . comprising means to control the venting
L60R21/30:	. . . . with means to draw ambient air into the flow line and mix such air with the inflation fluid
L60R21/33:	. . . Arrangements for non-electric triggering of inflation or of gas generation, e.g. also adapted for belt tensioners (electrical circuits for triggering safety arrangements L60R21/01)
L60R21/33P:	. . . . Connections between collision detecting means and inflators using pyrothechnic transmission lines
L60R21/34:	. Protecting non-occupants of a vehicle, e.g. pedestrians
L60R21/34E:	. . using deformable body panel, bodywork or components
L60R21/34F:	. . means outside vehicle body
L60R21/36:	. . using airbags
L60R21/38:	. . using means for lifting bonnets
L60R22/00:	Safety belts or body harnesses in vehicles
L60R22/00F:	. Knee, leg or head belts
L60R22/00P:	. for restraining detainees
L60R22/00R:	. for restraining luggages
L60R22/00S:	. Sleeve or tubular members enveloping the seat belt for enhancing comfort or protection
L60R22/00W:	. Belts; Fixing thereof specially adapted for pregnant users
L60R22/02:	. Semi-passive restraint systems, e.g. systems applied or removed automatically but not both; Manual restraint systems
L60R22/02A:	. . Means for holding the tongue or buckle in a non-use position, e.g. for easy access by the user
L60R22/02D:	. . with means for facilitating access to rear seats in two-door cars
L60R22/02F:	. . Three-point seat belt systems comprising two side lower and one side upper anchoring devices
L60R22/02F2:	. . . Adaptations for use by small passengers, e.g. children
L60R22/02F5:	. . . Adaptations for use with children seats or luggages
L60R22/02F7:	. . . at least two ends of the belt being retractable after use
L60R22/02G:	. . Four-point seat belt systems, e.g. with the two upper points connected together
L60R22/02S:	. . specially adapted for use in sleeping position, e.g. for reclining seats
L60R22/02T:	. . Belt storage; Devices or systems for controlling winding up of unused seat belt
L60R22/03:	. . Means for presenting the belt or part thereof to the wearer
L60R22/04:	. Passive restraint systems, i.e. systems both applied and removed automatically, e.g. by movement of the vehicle door
L60R22/44A:	. . . using means providing linear forces, e.g. weights, traction springs
L60R22/06:	. . having the belt or harness connected to a member slidable in a vehicle-mounted track
L60R22/08:	. . having the belt retractor mounted on or in a vehicle closure, e.g. the door
L60R22/10:	. specially adapted for children or animals
L60R22/10B:	. . for children
L60R22/12:	. Construction of belts or harnesses
L60R22/14:	. . incorporating enlarged restraint areas, e.g. vests, nets, crash pads, optionally for children
L60R22/16:	. . using belts which become permanently deformed, i.e. one time use
L60R22/18:	. Anchoring devices
L60R22/185:	. . with stopping means for acting directly upon the belt in an emergency, e.g. by clamping or friction
L60R22/185C:	. . . the means being sensitive to belt tension
L60R22/18A:	. . for buckles
L60R22/18B:	. . Connections between seat belt and buckle tongue
L60R22/18G:	. . Belt guides
L60R22/18G2:	. . . using rollers
L60R22/18G5:	. . . comprising a slotted plate sliding in its plane, e.g. inside circular guides
L60R22/18G6:	. . . comprising a universal mounting. e.g. spherical or cardan-type
L60R22/18G8:	. . . comprising an elongated sleeve
L60R22/19:	. . with means for reducing belt tension during use under normal conditions
L60R22/195:	. . with means to tension the belt in an emergency, e.g. means of the through-anchor or splitted reel type
L60R22/195A:	. . . characterised by arrangements in vehicle or relative to seat belt
L60R22/195B:	. . . Transmission of tensioning power by cable; Return motion locking means therefor
L60R22/195B2:	. . . . The cable being pulled by mechanical means, e.g. pre-stressed springs, bumper displacement during crash
L60R22/195D:	. . . characterised by fluid actuators, e.g. pyrotechnic gas generators
L60R22/195D2:	. . . . Linear actuators
L60R22/195D4:	. . . . Mechanical triggering means therefor
L60R22/195E:	. . . characterised by electric actuators
L60R22/195F:	. . . characterised by spring actuators
L60R22/20:	. . adjustable in position, e.g. in height
L60R22/20B:	. . . with the belt anchor connected to a slider movable in a vehicle-mounted track
L60R22/20B2:	. . . . the slider comprising spring-actuated locking means
L60R22/20B2B:	. . . . . the locking means being movably mounted on the slider
L60R22/20B4:	. . . . the slider comprising emergency actuated locking means
L60R22/20D:	. . . Adjustable stop members for restraint systems comprising belt anchor vehicle mounted tracks, e.g. for passive seat belts
L60R22/20H:	. . . Horizontally or transversally adjustable
L60R22/20R:	. . . by automatic or remote control means
L60R22/22:	. . secured to the vehicle floor
L60R22/24:	. . secured to the side, door, or roof of the vehicle
L60R22/26:	. . secured to the seat
L60R22/26F:	. . . Front seats
L60R22/26R:	. . . Rear seats, e.g. benches
L60R22/28:	. incorporating energy-absorbing devices
L60R22/28A:	. . for buckles
L60R22/28B:	. . using fluids or vico-elastic materials
L60R22/28D:	. . using tearing or scoring of material
L60R22/28E:	. . using electric or magnetic braking means
L60R22/28F:	. . using friction surfaces
L60R22/28G:	. . using deformation of material
L60R22/28G2:	. . . of torsion rods or tubes
L60R22/28L:	. . with means to adjust or regulate the amount of energy to be absorbed
L60R22/28N:	. . Energy-absorption curves
L60R22/30:	. Coupling devices other than buckles, including length-adjusting fittings
L60R22/32:	. Devices for releasing in an emergency, e.g. after an accident; Remote or automatic unbuckling devices
L60R22/32B:	. . using electric means
L60R22/32C:	. . using automatic actuating means
L60R22/32C2:	. . . triggered by strong traction on the seat belt, e.g. with temporisation
L60R22/32D:	. . using remote control means
L60R22/32H:	. . using pyrotechnic means
L60R22/32K:	. . comprising means for cutting the belt
L60R22/34:	. Belt retractors, e.g. reels
L60R22/343:	. . with electrically actuated locking means
L60R22/347:	. . with means for permanently locking the retractor during the wearing of the belt
L60R22/347C:	. . . having means for acting directly upon the belt, e.g. by clamping or friction
L60R22/34A:	. . Retractor casings; Mounting thereof
L60R22/34B:	. . of the non-rotary type
L60R22/34C:	. . without locking means
L60R22/34E:	. . comprising energy-absorbing means
L60R22/34E2:	. . . operating between belt reel and retractor frame
L60R22/34G:	. . Unlocking devices for retractors
L60R22/34H:	. . with end lock preventing means
L60R22/34K:	. . with means for locking the belt reel in a non-use position, e.g. for seat mounted retractor when the seat is in a non-locked condition
L60R22/34M:	. . Multi-spool or multi-belt retractors
L60R22/34S:	. . Seat belt connection on reels
L60R22/35:	. . . the locking means being automatically actuated
L60R22/353:	. . . . in response to belt movement when a wearer applies the belt
L60R22/353F:	. . . . . comprising anti-cinch devices
L60R22/357:	. . . . in response to fastening of the belt buckle
L60R22/36:	. . self-locking in an emergency
L60R22/38:	. . . responsive only to belt movement
L60R22/38A:	. . . . with adjustable sensitivity
L60R22/40:	. . . responsive only to vehicle movement
L60R22/405:	. . . responsive to belt movement and vehicle movement
L60R22/40A:	. . . . with adjustable sensor
L60R22/40A3:	. . . . . automatically adjustable to keep a vertical position, e.g. irrespective of seat or vehicle tilting
L60R22/40A3C:	. . . . . . using externally controlled means, e.g. linked with seat back hinge
L60R22/40B:	. . . . with remote sensor, e.g. for mounting on seat
L60R22/41:	. . . with additional means for preventing locking, during unwinding, under predetermined conditions
L60R22/415:	. . . with additional means allowing a permanent locking of the retractor during the wearing of the belt
L60R22/42:	. . . having means for acting directly upon the belt, e.g. by clamping or friction
L60R22/44:	. . with means for reducing belt tension during use under normal conditions
L60R22/44B:	. . . Spring shapes; Spring characteristic; Springs with adjustable anchoring means
L60R22/44C:	. . . by connecting the retracting spring to the belt reel by means of a transmission which decreases the spring force when the belt is pulled out, e.g. using conical pulleys
L60R22/44D:	. . . using one spring and one additional retraction device in parallel
L60R22/44D1:	. . . . the additional retraction device being a second spring
L60R22/44D1B:	. . . . . externally controlled
L60R22/44D5:	. . . . the additional retraction device being an electric actuator
L60R22/44F:	. . . using one spring and one additional retraction device in series
L60R22/44F1:	. . . . the additional retraction device being a second spring
L60R22/44F1B:	. . . . . with external control means
L60R22/44F5:	. . . . the additional retraction device being an electric actuator
L60R22/44K:	. . . using an electric retraction device
L60R22/44P:	. . . using a fluid actuated retraction device
L60R22/44T:	. . . for cancelling the belt tension
L60R22/44V:	. . . for braking the belt reel using friction surfaces or the like
L60R22/46:	. . with means to tension the belt in an emergency by forced winding up
L60R22/46A:	. . . characterised by arrangements in vehicle or relative to seat belt
L60R22/46A2:	. . . . using a plurality of tensioners
L60R22/46A4:	. . . . one pretensioner acting on a plurality of belts
L60R22/46B:	. . . Transmission of tensioning power by cable, e.g. using a clutch on reel side
L60R22/46B2:	. . . . the cable being pulled by mechanical means, e.g. pre-stressed springs, bumper displacement during crash
L60R22/46D:	. . . characterised by fluid actuators, e.g. pyrotechnic gas generators
L60R22/46D2:	. . . . Linear actuators, e.g. comprising a piston moving along reel axis and rotating along its own axis
L60R22/46D2R:	. . . . . comprising a piston moving along or in parallel to the reel axis
L60R22/46D3:	. . . . the gas directly propelling a flexible driving means, e.g. a plurality of successive masses, in a tubular chamber
L60R22/46D3C:	. . . . . the driving means being a belt, a chain or the like
L60R22/46D4:	. . . . Mechanical triggering means therefor
L60R22/46D7:	. . . . comprising a plurality of charges
L60R22/46D9:	. . . . comprising venting means, e.g. for avoiding overpressure in case of fire or for allowing return motion with energy absorption
L60R22/46E:	. . . characterised by electric actuators
L60R22/46F:	. . . characterised by spring actuators
L60R22/46H:	. . . comprising energy-absorbing means operating between belt reel and retractor frame
L60R22/46J:	. . . characterised by clutching means between actuator and belt reel
L60R22/46L:	. . . with means to adjust or regulate the tensioning force in relation to external parameters
L60R22/46R:	. . . reusable
L60R22/46T:	. . . without winding function during normal use
L60R22/48:	. Control systems, alarms, or interlock systems, for the correct application of the belt or harness
L60R22/48B:	. . Sensing means arrangements therefor
L60R22/48B1:	. . . for sensing locking of buckle
L60R22/48B2:	. . . for sensing amount of belt winded on retractor
L60R22/48B3:	. . . for sensing locking of retractor
L60R22/48B5:	. . . for sensing belt tension
L60R22/48B6:	. . . for sensing belt anchor position, belt orientation, or the like
L60R22/48B7:	. . . for sensing pressure on seat
L60R22/48D:	. . Displaying or indicating arrangements thereof
L60R22/48D1:	. . . on vehicle exterior
L60R22/48M:	. . Interlock systems
L60R22/48M1:	. . . preventing use of the vehicle when the seatbelt is not fastened
L60R25/00:	Fittings or systems for preventing or indicating unauthorised use or theft of vehicles ([N: for accessories, see the relevant groups, e.g. for radio sets B60R11/02B; anti-theft devices for wheel cover discs, rings or the like B60B7/16; covers, caps or guards for hitches, e.g. comprising anti-theft devices B60D1/60; anti-theft devices for spare wheels B62D43/00D; king pins with anti-coupling devices B62D53/08C2 ] locks for vehicles E05B65/12)
L60R25/00D:	. Anti-theft devices acting on jacking means or props, e.g. for trailers
L60R25/00G:	. Locking of control actuating or transmitting means of steering mechanism B60R25/02
L60R25/00G2:	. . locking of control actuating means
L60R25/00G2B:	. . . of foot actuated control means rods connecting pedals and steering wheels B60R25/02C2
L60R25/00G2B2:	. . . . using means preventing access, e.g. boxes, shutters
L60R25/00G2C:	. . . of hand actuated control means
L60R25/00G2C2:	. . . . comprising means for locking two or more control means together, e.g. hand-brake handle and gear shift lever
L60R25/01:	. [N: IPC 2013.01] operating on vehicle systems or fittings, e.g. on doors, seats or windscreens
L60R25/01B:	. . [N: Airbags triggered ]
L60R25/01K:	. . [N: comprising means for locking the seat or parts thereof in a driving prevention position]
L60R25/01L:	. . [N: comprising means for shuttering the windscreen or part thereof]
L60R25/01M:	. . [N: Thief traps]
L60R25/02:	. . operating on the steering mechanism
L60R25/021:	. . . [N: IPC 2013.01] restraining movement of the steering column or steering wheel hub, e.g. restraining means controlled by ignition switch
L60R25/0215:	. . . . [N: IPC 2013.01] using electric means, e.g. electric motors or solenoids
L60R25/0215A:	. . . . . [N: comprising a locking member radially and linearly moved towards the steering column ]
L60R25/0215B:	. . . . . [N: comprising a locking member axially moved along the steering column ]
L60R25/021A:	. . . . [N: with supplementary safety device preventing operation of the starter of an engine already running ]
L60R25/021B:	. . . . [N: Arrangement of the steering column thereof ]
L60R25/021B1:	. . . . . [N: comprising overload clutching means ]
L60R25/021C:	. . . . [N: comprising a locking member radially and linearly moved towards the steering column ]
L60R25/021C1:	. . . . . [N: manually actuated, e.g. using removable locking means]
L60R25/021C2:	. . . . . [N: key actuated ]
L60R25/021C2A:	. . . . . . [N: with linear bolt motion parallel to the lock axis ]
L60R25/021C2A1:	. . . . . . . [N: comprising safety devices avoiding locking until removal of the key]
L60R25/021C2A1A:	. . . . . . . . [N: using an axially slidable lock cylinder ]
L60R25/021C2B:	. . . . . . [N: with linear bolt motion perpendicular to the lock axis ]
L60R25/021C2B1:	. . . . . . . [N: comprising safety devices avoiding locking until removal of the key ]
L60R25/021C2B1A:	. . . . . . . . [N: by using an axially slidable lock cylinder ]
L60R25/021D:	. . . . [N: comprising a locking member axially moved along the steering column ]
L60R25/021D1:	. . . . . [N: manually actuated, e.g. using removable locking members ]
L60R25/021D2:	. . . . . [N: key actuated ]
L60R25/021E:	. . . . [N: comprising externally controlled safety devices for preventing locking during vehicle running condition ]
L60R25/021E1:	. . . . . [N: interlocked with gear box or gear lever ]
L60R25/021F:	. . . . [N: comprising a locking member having other than linear, axial or radial motion, e.g. rotatable; Steering column locking using balls, rollers or the like ]
L60R25/022:	. . . [N: IPC 2013.01] operating on the steering wheel, e.g. bars locked to the steering wheel rim (B60R25/021 takes precedence)
L60R25/022B:	. . . . [N: restraining means joining the steering wheel with another part of the car, e.g. pedals ]
L60R25/022D:	. . . . [N: by disjoining steering wheel and column ]
L60R25/022F:	. . . . [N: restraining of steering wheel by collapsing against column ]
L60R25/022H:	. . . . [N: using a rod locked on the steering wheel rim (B60R25/022B takes precedence) ]
L60R25/022J:	. . . . [N: using means preventing access, e.g. boxes enclosing the steering wheel (B60R25/01K takes precedence) ]
L60R25/022L:	. . . . [N: comprising a locking bolt or fork slidable between or around the steering wheel spokes ]
L60R25/023:	. . . [N: IPC 2013.01] countermeasures against the physical destruction of the steering lock
L60R25/04:	. . operating on the propulsion system, e.g. engine or drive motor
L60R25/042:	. . . IPC2013.01 operating on the fuel supply
L60R25/043:	. . . IPC2013.01 by blocking the exhaust
L60R25/044:	. . . IPC2013.01 by limiting or blocking the air supply
L60R25/045:	. . . IPC2013.01 by limiting or cutting the electrical supply to the propulsion unit
L60R25/04B:	. . . from the external
L60R25/04C:	. . . Preventing use of engine operating on the fluid supply
L60R25/04D:	. . . with safe immobilisation
L60R25/06:	. . . operating on the vehicle transmission
L60R25/06B:	. . . . Locking of foot actuated control actuating means
L60R25/06D:	. . . . Locking of hand actuated control actuating means
L60R25/08:	. . operating on brakes or brake system
L60R25/08B:	. . . Locking of foot-actuated control actuating means
L60R25/08D:	. . . Locking of hand-actuated control actuating means
L60R25/09:	. . IPC2013.01 by restraining wheel rotation, e.g. wheel clamps
L60R25/09B:	. . . [N: comprising ground-engaging means]
L60R25/09D:	. . . [N: comprising means for deflating tyres ]
L60R25/10:	. Actuating a signalling device
L60R25/102:	. . IPC 2013.01 a signal being sent to a remote location, e.g. a radio signal being transmitted to a police station, a security company or the owner
L60R25/102B:	. . . preventing jamming or interference of said signal
L60R25/104:	. . IPC 2013.01 characterised by the type of theft warning signal, e.g. visual or audible signals with special characteristics
L60R25/104B:	. . . Signal comming from the exhaust
L60R25/10A:	. . Alarm systems associated with another car fitting or mechanism, e.g. door lock or knob, pedals
L60R25/10B:	. . Alarm systems characterised by arm or disarm features
L60R25/10C:	. . Alarm systems characterised by the type of sensor, e.g. current sensing means
L60R25/10C1:	. . . Mechanical sensors, e.g. pendulums
L60R25/10C1B:	. . . . comprising associated circuitry
L60R25/10C2:	. . . Sonic sensors; Signal treatment therefor
L60R25/10C3:	. . . Fuel level sensors
L60R25/10C4:	. . . Zone surveillance means, e.g. parking lots, truck depots
L60R25/10D:	. . Alarm systems characterised by the type of warning signal, e.g. visual, audible
L60R25/10D1:	. . . Signal coming from the exhaust
L60R25/10D2:	. . . Remote signals alerting owner or authorities, e.g. radio signals
L60R25/10F:	. . Alarm systems characterised by features related to the general power supply
L60R25/20:	. IPC2013.01 Means to switch the anti-theft system on or off
L60R25/20B:	. . [N: Antitheft state indicator ]
L60R25/20D:	. . [N: Central base unlocks or authorises unlocking ]
L60R25/20F:	. . [N: with data signals passing through the human body]
L60R25/20H:	. . [N: by using the door logic and door and engine unlock means]
L60R25/20J:	. . [N: by hand gestures]
L60R25/20L:	. . [N: by foot gestures]
L60R25/20N:	. . [N: Ignition switch geometry]
L60R25/20P:	. . [N: with means for preventing jamming or interference of a remote switch control signal]
L60R25/20R:	. . [N: combined with personal settings of other vehicle devices, e.g. mirrors, seats, steering wheels]
L60R25/20S:	. . [N: Remote starting of engine]
L60R25/21:	. . IPC2013.01 using hidden switches
L60R25/22:	. . IPC2013.01 using mechanical identifiers
L60R25/22B:	. . . [N: key in lock presence switch]
L60R25/23:	. . IPC2013.01 using manual input or alphanumerical codes
L60R25/24:	. . IPC2013.01 using electronic identifiers containing a code not memorised by the user
L60R25/24B:	. . . [N: whereby access privileges are related to the identifiers]
L60R25/24D:	. . . [N: with more than one way to gain access]
L60R25/24F:	. . . [N: where the antenna reception area plays a role]
L60R25/24H:	. . . [N: characterised by the challenge triggering]
L60R25/24J:	. . . [N: Electronic key extraction prevention]
L60R25/25:	. . IPC2013.01 using biometry
L60R25/25B:	. . . [N: Fingerprint recognition]
L60R25/25D:	. . . [N: Eye recognition]
L60R25/25F:	. . . [N: Voice recognition]
L60R25/30:	. IPC2013.01 Detection related to theft or to other events relevant to anti-theft systems
L60R25/30B:	. . [N: using recording means, e.g. black box]
L60R25/30D:	. . [N: using a camera]
L60R25/30F:	. . [N: using data concerning maintenance or configuration]
L60R25/31:	. . IPC2013.01 of human presence inside or outside the vehicle
L60R25/32:	. . IPC2013.01 of vehicle dynamic parameters, e.g. speed or acceleration
L60R25/33:	. . IPC2013.01 of global position, e.g. by providing GPS coordinates
L60R25/34:	. . IPC2013.01 of conditions of vehicle components, e.g. of windows, door locks or gear selectors
L60R25/40:	. IPC2013.01 Features of the power supply for the anti-theft system, e.g. anti-theft batteries, back-up power supply or means to save battery power
L60R25/40B:	. . [N: Power supply in the vehicle]
L60R25/40D:	. . [N: Power supply in the remote key]
L60R27/00:	Other vehicle fittings; Vehicles, or vehicle parts not otherwise provided for
L60R27/00C:	. Protections for occupants being left unattended in vehicles, e.g. children
L60R27/00M:	. Protections against martens or rodents
L60R27/00S:	. Engine sound simulators
L60R99/00:	Subject matter not provided for in other groups of this subclass
L60R99/00M:	. Protections against martens or rodents
L60R225/00:	Means indicating the functioning state of the alarm system, e.g. indicating arming, using leds
L60R300/00:	Details of viewing arrangements using cameras and displays, specially adapted for use in a vehicle
L60R300/70O:	. . by overlaying a real scene, e.g. through head-up display on windscreen
L60R300/80O:	. . for protecting a vehicle occupant
L60R300/10:	. characterised by the type of camera system used
L60R300/10A:	. . using cameras with adjustable capturing direction
L60R300/10D:	. . using 360 degree surveillance camera system
L60R300/10L:	. . using camera systems provided with artificial illumination device, e.g. IR light source
L60R300/10M:	. . using multiple cameras
L60R300/10N:	. . using night vision cameras
L60R300/10S:	. . using stereoscopic cameras
L60R300/10X:	. . using 'non-standard' camera systems, e.g. camera sensor used for additional purposes i.a. rain sensor, camera sensor split in multiple image areas
L60R300/20:	. characterised by the type of display used
L60R300/20D:	. . displaying a blind spot scene on the vehicle part responsible for the blind spot
L60R300/20H:	. . using a head-up display
L60R300/20M:	. . using multi-purpose displays, e.g. camera image and navigation or video on same display
L60R300/30:	. characterised by the type of image processing
L60R300/30C:	. . combining image information with other obstacle sensor information, e.g. using RADAR/LIDAR/SONAR sensors for estimating risk of collision
L60R300/30G:	. . combining image information with GPS information or vehicle data, e.g. vehicle speed, gyro, steering angle data
L60R300/30J:	. . using joined images, e.g. multiple camera images
L60R300/30M:	. . using merged images, e.g. merging camera image with stored images
L60R300/30M1:	. . . merging camera image with lines or icons
L60R300/30R:	. . using a re-scaling of images
L60R300/30V:	. . virtually distinguishing relevant parts of a scene from the background of the scene
L60R300/30V1:	. . . by overlaying the real scene, e.g. through a head-up display on the windscreen
L60R300/40:	. characterised by the details of the power supply or the coupling to vehicle components
L60R300/40C:	. . Image calibration
L60R300/40T:	. . triggering from stand-by mode to operation mode
L60R300/40W:	. . using wireless transmission
L60R300/40X:	. . using a data bus
L60R300/50:	. characterised by the display information being shared, e.g. external display, data transfer to other traffic participants or centralised traffic controller
L60R300/60:	. characterised by monitoring and displaying vehicle exterior scenes from a transformed perspective
L60R300/60A:	. . with an adjustable viewpoint
L60R300/60A1:	. . . the adjustment being automatic
L60R300/60B:	. . from a bird's eye viewpoint
L60R300/70:	. characterised by an event-triggered choice to display a specific image among a selection of captured images
L60R300/80:	. characterised by the intended use of the viewing arrangement
L60R300/80C:	. . for monitoring and displaying scenes of vehicle interior, e.g. for monitoring passengers or cargo
L60R300/80C1:	. . . for child monitoring
L60R300/80E:	. . for monitoring and displaying vehicle exterior blind spot views
L60R300/80E1:	. . . in addition to a rear-view mirror system
L60R300/80F:	. . for pedestrian protection
L60R300/80L:	. . for lane monitoring
L60R300/80M:	. . for replacing a rear-view mirror system
L60R300/80N:	. . for bad weather conditions or night vision
L60R300/80P:	. . for aiding parking
L60R300/80R:	. . for monitoring rearward traffic
L60R300/80S:	. . for vehicle security, e.g. parked vehicle surveillance, burglar detection
L60R300/80T:	. . for facilitating docking to a trailer
L60R300/80V:	. . for vehicle path indication
L60R300/80W:	. . for obstacle warning
L60R325/00:	Indexing scheme relating to vehicle anti-theft devices
L60R325/10:	. Communication protocols, communication systems of vehicle anti-theft devices
L60R325/10B:	. . Bluetooth
L60R325/10D:	. . Near field communication [NFC]
L60R325/10F:	. . Radio frequency identification data [RFID]
L60R325/10H:	. . Internet
L60R325/10J:	. . Encryption
L60R325/20:	. Communication devices for vehicle anti-theft devices
L60R325/20B:	. . Personal digital assistant [PDA]
L60R325/20D:	. . Mobile phones
L60R325/20H:	. . Satellites
L60R325/30:	. Vehicles applying the vehicle anti-theft devices
L60R325/30B:	. . Airplanes
L60R325/30D:	. . Boats
L60R325/30F:	. . Motorcycles
L60R325/30H:	. . Industrial vehicles
L60R325/40:	. Programmable elements